Warranty Registration

Thank you for purchasing your Clear Bra and having it installed by us at Autoshield Premium Paint

Protection. Please complete the warranty online registration form below. This registration serves as

your proof of purchase and will allow us to keep you informed on product updates and keeps you in our

system as well if needed in the future so you can go paperless with your warranty card!

XPEL ULTIMATE Protection Film Care:


XPEL ULTIMATE Paint Protection Film behaves differently than any other film on the market and can be treated in way that would destroy other films. DO NOT attempt these measures on any other films.


    •  WAIT 48 hours after installation to wash your car.

    •  Remove insects or other stains with bug and tar remover.

    •  Stubborn stains can be removed with 99% isopropyl alcohol or lacquer

       thinner. Take care to keep these chemicals off the vehicle’s paint.

    •  Seal with XPEL Flawless Finish Paint Protection Film Sealant at least once

       every 3 months to preserve high gloss.

    •  Light scratches in the film will self-heal in 20-30 minutes at room

       temperature. In colder conditions, or to accelerate the process, pour warm

       water (120°F) over the affected area.


All other XPEL Protection Films: Care Instructions


  1. Wait 48 hours after installation to wash your car

  2. Use only soft terry cloth or microfiber towels on the film

  3. Do NOT wipe or scrub the film in direct sunlight or when the film is hot

  4. Do NOT use abrasive cleaners on the film

  5. Do NOT use dyed or colored car waxes on the film



Removing Scratches


Most scratches in the film can be removed using a rotary or dual-action buffer. For best results, it is recommended to use 3M Perfect-It Machine Polish (part number 06064) used with their color coded buffing pad (Part number 05738). If needed, this product can be followed by 3M Perfect-It Ultrafine Machine Polish (part number 06068) used with the blue pad (part number 05733) to restore a deep, swirl free shine.


Waxing the Film


Contamination from road oils, diesel smoke, pollen, and pollution can cause discoloration and deglossing of the film. While traditional automotive waxes can provide a small level of protection against contamination, XPEL Flawless Finish Film Sealant is designed specifically to provide the strongest possible barrier against these and other contaminants. Moreover, waxes that contain dyes and other chemicals such as naptha or kerosene may discolor or degloss the film over time and should be avoided.


Ask for XPEL Flawless Finish Film Sealant from your installer or purchase it online at www.XPEL.com

Homeindex.htmlshapeimage_4_link_0
Aboutabout.htmlshapeimage_5_link_0
Learnlearn.htmlshapeimage_6_link_0
Gallerygallery.htmlshapeimage_7_link_0
Contactcontact.htmlshapeimage_8_link_0
Packagespackages.htmlshapeimage_10_link_0
faqfaq.htmlshapeimage_12_link_0
5745 Kearny Villa Rd #112
San Diego, CA 92123
760.707.2784 
info@autoshieldca.com